IGET BAR PRO: charging, safe handling and disposal
The checked IGET BAR PRO page publishes a 2000 mAh battery specification, but it does not publish a charging port, cable, input rating, charge time or disassembly procedure. Battery capacity alone is not evidence that a device should be connected to a cable.
This page separates verified BAR PRO information from general Australian lithium-ion battery guidance. It does not invent model-specific charging instructions.
What the checked BAR PRO source confirms
| Puff figure | Up to 10,000 puffs |
|---|---|
| Battery | 2000 mAh |
| Coil | 1.2 Ω Mesh Coil |
| Dimensions | 44.1 × 22.5 × 96.5 mm |
| Net weight | 93 g |
| Material wording | PC+ALU |
Open the BAR PRO product page for the detailed catalogue record and source notes. Read the puff-count and battery guide for why those two figures do not guarantee days of use.
Does the source confirm rechargeability?
No. The checked manufacturer page lists battery capacity but does not publish a charging interface, charger specification or charge time. Use only instructions supplied for the exact unit or confirmation from IGET. Do not infer a charging method from the mAh number or from a similar-looking model.
General lithium-ion battery precautions
- Stop using a device that is swollen, leaking, damaged, unusually hot or producing an unusual smell.
- Do not puncture, crush, modify or expose an embedded battery.
- For a device its manufacturer explicitly identifies as rechargeable, use only the supplied or manufacturer-recommended compatible charger and charge on a hard, non-flammable surface.
- Do not charge while asleep or away from home.
These are general precautions from Australian battery-safety guidance, not missing BAR PRO charging specifications.
Can you open an IGET BAR PRO?
The checked manufacturer page does not identify a user-serviceable panel, removable battery or disassembly procedure. A visible seam is not proof that the electrical enclosure is designed to be opened. Do not pry off the housing, expose wiring or attempt to remove or repair the embedded cell.
Disposal in Australia
Do not place a vape or embedded lithium-ion battery in household rubbish or kerbside recycling. In NSW, use an approved embedded-battery collection point or Household Chemical CleanOut service. Elsewhere, check the current advice from your state authority or local council and keep the device intact for disposal.
Sources
- IGET BAR PRO manufacturer product page.
- Product Safety Australia: lithium-ion batteries guide.
- NSW Government: lithium-ion battery disposal.
- Checked 16 November 2026. Model-specific gaps remain labelled as gaps.